How do I install the KUFTEC APS Advance Rear View Camera? (KUFTEC APS Rear View Camera Installation Guide)

Answer

manuals.plus

Jan 17, 2025 - 11:59 PM


To install the KUFTEC APS Advance Rear View Camera, please follow the steps outlined in the provided manual. Here is a general guide:

1. Start by locating the rear view camera and the connection main unit/CAN Bus in your vehicle. Refer to the vehicle overview in the manual for their positions.

2. Lay the cable set in the most convenient and shortest way possible, ensuring that it is securely routed and not obstructing any other components.

3. Connect the rear view camera to the connection main unit using the provided cables. Follow the specific instructions in the manual for the correct connections.

4. If your vehicle has a CAN Bus system, connect the connection main unit to the CAN Bus using the appropriate cables. Again, refer to the manual for detailed instructions.

5. Once all the connections are made, double-check that everything is securely connected and properly routed.

6. Test the rear view camera by turning on your vehicle's ignition and engaging the reverse gear. The camera should display the rear view on your vehicle's display or monitor.

Please note that this is a general guide, and it is essential to refer to the detailed instructions and diagrams provided in the manual for your specific vehicle model. If you encounter any difficulties during the installation process, it is recommended to consult a professional or contact Kufatec GmbH & Co. KG for further assistance.