User Manual Q&AAnswer
Jan 17, 2025 - 11:56 PM
To mount the SuperSat speakers on the wall, you will need to follow these steps:
1. Obtain the appropriate wall mounting hardware suitable for your wall type and the weight of the speaker.
2. Use the included Wall Mount Template to mark the mounting xxxx locations on the wall using the holes in the template marked "Pilot Holes".
3. Install your mounting hardware in the marked locations, leaving 1/8" (3mm) of space between the back of the xxxx head and the wall.
4. Attach a wall mount pad to each of the four back corners of the speaker.
5. Carefully align the keyholes in the back of the SuperSat speaker with the screws in the wall and gently slide the speaker into place.
6. If the speaker does not slide into place, back the screws out a turn and try again. If the speaker is loose, turn the screws in another turn and try again. Repeat as necessary.
Please note that the hardware for mounting the speakers to the wall is not included, so you will need to obtain it separately. If you are not comfortable performing the mounting procedures, it is recommended to have a professional wall mount the speakers for you.
Add New Comment