User Manual Q&AAnswer
Jan 17, 2025 - 11:48 PM
To change the screwdriver bit on the BOSCH PSR Select Cordless Screwdriver, follow these steps:
1. Before changing the bit, ensure that the rotational direction switch is set to the middle position to prevent any accidental operation.
2. Turn the bit magazine until an empty chamber is visible in the viewing window.
3. Push the sliding switch forwards to unlock the bit magazine.
4. Insert the desired screwdriver bit directly into the tool holder.
5. Push the sliding switch backwards to load the screwdriver bit into the bit magazine.
6. Once the sliding switch is pushed backwards or the on/off switch is pressed while in the rear position, the bit magazine will be illuminated for approximately 20 seconds.
Please refer to the product manual for visual references and additional instructions.
Add New Comment