User Manual Q&AAnswer
Jan 17, 2025 - 11:43 PM
To attach and remove the accessory on the Metabo 613088850 MT 18 LTX BL Q SL Cordless Multi Tool, follow these steps:
1. Prior to any conversion work, remove the battery pack from the machine for safety.
2. Swivel the clamping lever located on the tool forward by 180 degrees.
3. Turn the spring pin slightly in an anti-clockwise direction and remove it.
4. Put the accessory in the desired position on the tool holder, ensuring that it engages in the cams of the tool holder.
5. Insert the spring pin and turn it by 90 degrees in a clockwise direction.
6. Close the clamping lever until it stops and engages. Be careful as the clamping lever may spring back and can crush your fingers. Wear protective gloves.
7. Check the accessory for a firm hold.
Please refer to the instruction manual for visual illustrations and further details on attaching and removing accessories.
Add New Comment