User Manual Q&AAnswer
Jan 17, 2025 - 10:50 PM
To start the WOLPERTECH WT - HW 600 Durable Domestic Water Garden Pump, follow these steps:
1. Ensure that the pump is properly connected to a power source with a voltage of 230V~50Hz.
2. Make sure that the pump is filled with water before starting it. The pump must not run without fillings.
3. Once the pump is connected and filled with water, switch on the power supply.
4. The pump will start operating and begin pumping water.
Please note that it is important to read and understand the operating instructions provided in the manual before using the appliance. Familiarize yourself with the control elements and how to use the appliance properly. Abide by all safety measures stated in the service manual and act responsibly toward third parties. If you have any doubts about connection and operations, refer to the customer center for assistance.
Add New Comment