User Manual Q&AAnswer
Jan 17, 2025 - 10:44 PM
If your autoterm FLOW 5D Diesel Water Heater is experiencing overheating, there are several troubleshooting steps you can take to resolve the issue. Here is a step-by-step guide:
1. Check the entire liquid circuit for air blocks: Air blocks in the liquid circuit can disrupt the flow of coolant and cause overheating. Ensure that there are no air bubbles or obstructions in the liquid circuit.
2. Check the pump: A faulty pump can result in inadequate coolant circulation, leading to overheating. Inspect the pump for any signs of damage or malfunction. Clean the pumping elements if necessary.
3. Check the overheating sensor and temperature sensor: The overheating sensor and temperature sensor monitor the temperature near the sensors. Ensure that these sensors are functioning properly and replace them if necessary.
4. Check the antifreeze for suitability at current ambient temperatures: The antifreeze used in the heater should be suitable for the current ambient temperatures. Verify that the antifreeze is appropriate for the operating conditions.
By following these troubleshooting steps, you should be able to identify and resolve the overheating issue with your autoterm FLOW 5D Diesel Water Heater. If the problem persists, it is recommended to consult the manufacturer or a qualified technician for further assistance.
Add New Comment