Answer
Jan 17, 2025 - 10:35 PM
https://manuals.plus/wp-content/uploa... Copy URL to clipboard ATTACHMENT DISPLAY SETTINGS Alignment Center Link To None Size Full Size – 494 × 323 Selected media actions 1 item selected Clear Insert into post" width="291" height="190" />
To arm (lock) the LC680PKE One Push Start system, you can follow these steps:
1. Press the "Arm" button on the PKE remote once. The siren will sound once, and the central control lock door will be locked.
2. If you want to remote start the engine, press and hold the "Arm" button for three seconds. The engine will start warming up for 15 minutes, and the siren will sound once. After 5 seconds, the central door will be locked, and the siren will sound once.
3. If you want to turn off the remote-started engine, press and hold the "Arm" button for 3 seconds. The engine will turn off, and the siren will sound once. After 5 seconds, the central control door lock will be locked again, and the siren will sound once.
Please note that these instructions may vary depending on the specific button icons on your remote. It's best to refer to the real remote for accurate button functions.
Add New Comment