User Manual Q&AAnswer
Jan 17, 2025 - 10:20 PM
To install the hose on the V-TUF V5.141SS Hose Reel Super, follow these steps:
1. Ensure that the reel stop is engaged to prevent the reel from unwinding during installation.
2. Choose the appropriate hose length according to the recommended lengths mentioned in the specification. For this model, you can use either a 45m 3/8 2w HOSE or a 60m 5/16 2w HOSE.
3. Take the selected hose and feed it through the hose guide, located on the side of the reel.
4. Continue feeding the hose until it reaches the desired length, making sure to leave enough slack for easy maneuverability.
5. Once the hose is at the desired length, attach the end of the hose to the hose reel drum by inserting the hose fitting into the drum's connector.
6. Ensure that the hose fitting is securely attached to the drum to prevent any leaks or disconnections during use.
7. Release the reel stop to allow the hose to wind onto the reel.
8. Slowly turn the reel handle clockwise to wind the hose onto the reel. Make sure to keep tension on the hose to ensure even winding.
9. Continue winding until the entire length of the hose is neatly stored on the reel.
10. Your V-TUF V5.141SS Hose Reel Super is now ready for use.
For more detailed instructions and illustrations, please refer to the instruction manual provided with the product.
Add New Comment