User Manual Q&AAnswer
Jan 17, 2025 - 09:47 PM
To install the QAZQA HL 35 Modern pendant lamp, please follow the steps outlined in the instruction manual:
1. Start by turning off the power supply to the area where you will be installing the pendant lamp.
2. Carefully unpack the pendant lamp and ensure that all the necessary parts are included.
3. Identify the mounting plate and attach it to the ceiling using the provided screws and wall plugs. Make sure the mounting plate is securely fixed to the ceiling.
4. Connect the wires from the ceiling to the wires of the pendant lamp. The pendant lamp should have three wires: a live wire (usually colored brown or black), a neutral wire (usually colored blue), and an earth wire (usually colored green/yellow). Match the corresponding wires from the ceiling to the pendant lamp wires and use wire connectors or terminal blocks to secure the connections. Ensure that the connections are tight and insulated.
5. Once the wiring is complete, carefully attach the pendant lamp to the mounting plate. Follow the instructions provided in the manual to properly secure the lamp to the mounting plate. Make sure the pendant lamp is securely attached and does not wobble.
6. Finally, turn on the power supply and test the pendant lamp to ensure it is functioning properly.
Please note that these instructions are a general guideline and may vary depending on the specific model of the QAZQA HL 35 pendant lamp. It is always recommended to refer to the instruction manual provided with the product for detailed and model-specific installation instructions.
Add New Comment