User Manual Q&AAnswer
Jan 17, 2025 - 09:28 PM
To connect the FS COM S5850-48T4Q switch to your network, follow these steps:
1. Connect one end of an RJ-45 cable to the network port of your PC and the other end to the Management interface of the S5850-48T4Q switch.
2. Connect one end of the console line USB to your PC's USB interface and the other end of the RJ-45 connector to the console interface on the front panel of the switch.
For more detailed instructions, please refer to the "Connection equipment" section in the user manual.
Note: Make sure to download and install the necessary software, such as SecureCRT debugging software and Tftpd32 file transfer software, as mentioned in the manual.
Add New Comment