How do I assemble the SONGMICS GLR040 Heavy Duty Shelves? (SONGMICS GLR040 Heavy Duty Shelves Instruction Manual)

Answer

manuals.plus

Jan 17, 2025 - 09:09 PM


To assemble the SONGMICS GLR040 Heavy Duty Shelves, please follow these steps:

1. Insert both of the part D clips into the two slots of part B, ensuring that the clips pass entirely through the slot with the tip coming back out to the front. This forms a firm joint.
2. Insert both of the part C clips into the two slots of part B, making sure that the clips pass entirely through the slot with the tip coming back out to the front. This forms a firm joint.
3. Bend the clip of part F to a 90-degree angle and insert it into the slot at the middle of part C. Then, bend the tip part of the clips to a 90-degree angle for a tight joint. This ensures that part F doesn't come off from part C.
4. After finishing the assembly, move the rack to the desired place. Then, fix it to the wall with the anti-tipping devices provided. This prevents any potential tipping hazards caused by uneven ground or unevenly distributed items.

Please note that it is recommended to have two adults assemble the shelves and to wear gloves during assembly to prevent injury. Additionally, it is advised to use gloves, a rubber hammer, and a flat head screwdriver during assembly, which should be provided by yourself. Make sure to also check for any broken or missing parts according to the shipping list after unpacking.

For further information and assistance, please consult the SONGMICS GLR040 Heavy Duty Shelves Instruction Manual or contact the manufacturer directly.