How do I assemble the hJh OFFICE INSTRUCTOR T I PRO Swivel Chair Fabric? (hJh OFFICE INSTRUCTOR T I PRO Swivel Chair Instruction Manual)

Answer

manuals.plus

Jan 17, 2025 - 08:55 PM


To assemble the hJh OFFICE INSTRUCTOR T I PRO Swivel Chair Fabric, please follow these steps:

1. First, unpack all parts of the delivery and check them for any possible transport damage. If you find any damaged or missing parts, please contact the manufacturer before proceeding with the installation.

2. Remove the protective cap (if present) from the trigger pin of the gas spring before installation. This can be easily done by using two fingers.

3. If your chair has been delivered with carpet castors, please note that they are only suitable for use on carpeted floors. For hard floors like parquet, laminate, or tiled floors, you will need special hard floor castors, which can be ordered as an accessory. It is also recommended to use a floor mat.

4. If your chair has been delivered with multifunctional castors, they are suitable for both carpeted and hard floors. However, it is still recommended to use a floor mat.

5. When assembling the chair, it is important to tighten all screws only partially at first. Only after all screws have been inserted into their respective threads should they be fully tightened.

Please refer to the instruction manual provided with your chair for detailed assembly instructions and illustrations. If you need further assistance or have any additional questions, you can contact the manufacturer's customer service via phone at +44 (0) 203 318 5230 or email at service@hjh-office.co.uk.