User Manual Q&AAnswer
Jan 17, 2025 - 08:17 PM
To connect your cell phone to the KENWOOD DRV KCA Dash Cam Car Camera using the app, follow these steps:
1. Make sure your cell phone meets the minimum system requirements: Android 7.0 or later for Android phones, or iOS 11 or later for iPhones.
2. Search for the "KENWOOD Motorsports CAM App" on the Google Play Store (for Android) or the App Store (for iPhones).
3. Download and install the app on your cell phone.
4. Ensure that your cell phone is connected to the internet, either through mobile data or Wi-Fi.
5. Press and hold the switch button on the main unit of the dash cam for 3 seconds to switch to wireless LAN mode. The orange status LED will light up and the blue LED will blink, indicating that the main unit is preparing to connect to your cell phone.
6. Open the settings on your cell phone and turn on Wi-Fi.
7. Look for the network named "STZ_RF200WD_(serial number)" in the available networks list.
8. Tap on the network and enter the default password "12341234". If you have changed the password, enter the new password.
9. Tap connect to connect your cell phone to the dash cam unit.
10. The first time you connect, a message asking for access permission will appear on your cell phone's screen. Tap "Accept" to continue.
11. Once connected, you can use the KENWOOD Motorsports CAM App on your cell phone to view and download videos recorded and saved on the SD card, as well as change device settings.
Please refer to the user guide for more detailed instructions and troubleshooting tips.
Add New Comment