User Manual Q&AAnswer
Jan 17, 2025 - 08:10 PM
To connect your JBL 3 Series MkII Professional Loudspeakers to your audio equipment, follow these steps:
1. Determine the type of output connectors on your audio equipment (balanced XLR or 6mm TRS).
2. Locate the corresponding input connectors on the back of the JBL loudspeakers.
3. Use balanced audio cables (XLR or 6mm TRS) to connect the output connectors of your audio equipment to the input connectors of the JBL loudspeakers.
4. If your audio equipment has balanced XLR outputs, use balanced XLR cables to connect the XLR outputs to the XLR inputs on the JBL loudspeakers.
5. If your audio equipment has 6mm TRS outputs, use 6mm TRS cables to connect the 6mm TRS outputs to the 6mm TRS inputs on the JBL loudspeakers.
6. Make sure the INPUT SENSITIVITY switch on the JBL loudspeakers is set to the appropriate setting for your audio equipment (-10dBV for consumer-grade equipment or +4dBu for professional-grade equipment).
7. Repeat the above steps for each JBL loudspeaker in your setup.
By following these steps, you should be able to successfully connect your JBL 3 Series MkII Professional Loudspeakers to your audio equipment. For more detailed information, please refer to the "Audio Connections" section of the owner's manual.
Add New Comment