Answer
Jan 17, 2025 - 10:44 AM
To calibrate the Adam CB 501 Portable Compact Balance, follow the instructions provided in the user manual. Here is a step-by-step guide:
1. Turn on the scale and zero it.
2. Press and hold the "MODE" and "→0←" keys together for about 5 seconds until the display shows the value of the internal code.
3. Press the "MODE" key once, and the display will show CALL→[xxxx], where "xxxx" is the full capacity weight value.
4. Load the calibration weight as per the displayed value. For the CB 501 model, the calibration mass is typically 500g.
5. The scale will automatically calibrate itself based on the calibration weight. After calibration, the scale will return to normal weighing mode.
6. Calibration is now complete, and you can start using the balance for accurate weighing.
Please note that the calibration process may vary slightly depending on the specific model or firmware version of the CB 501 balance. It is always recommended to refer to the user manual provided with the product for the most accurate and up-to-date calibration instructions.
Add New Comment