User Manual Q&AAnswer
Jan 17, 2025 - 10:17 AM
To install the Fujitsu FI-718PR Imprinter, follow these steps:
1. Turn off the scanner and disconnect the power cable.
2. Remove the stacker from the scanner by holding the left side of the stacker with your left hand and gently pulling it while pushing against the scanner with your thumb.
3. Once the left arm of the stacker is released, remove the right arm.
4. Install the scanner onto the imprinter by holding the scanner above the rear side of the imprinter and gently mounting it onto the imprinter while lowering it forward until it makes contact with the imprinter.
5. Raise the locks on the back of the scanner and turn them inwards.
6. Connect the EXT cable to the connector on the back of the scanner. Note that the imprinter will not work if the EXT cable is not connected.
7. Attach the stacker back on the front of the imprinter.
8. Connect the power cable to the scanner.
Please refer to the Fujitsu FI-718PR Imprinter Operator's Guide for more detailed instructions and illustrations.
Add New Comment