User Manual Q&AAnswer
Jan 17, 2025 - 05:58 AM
To pair the HPM Smart Downlight with the HPM Connect App, follow these steps:
1. Make sure your smart device is connected to the internet and Bluetooth & Location are turned ON.
2. Reset the downlight by powering it ON, then switching it OFF/ON 5 times (with an OFF period of 1-2 seconds). The downlight should start blinking slowly.
3. Open the HPM Connect App and click on "Add Device" or the "+" button.
4. Select "Lighting" and then choose either "Auto Scan" or "Add Manually" depending on your preference.
5. If you choose "Auto Scan," select "Next" and press "Done" once the downlight is detected.
6. If you choose "Add Manually," follow the on-screen instructions to manually add the downlight.
7. Congratulations! Your HPM Smart Downlight is now paired with your smart device. You can now control your downlight from the HPM Connect App.
Please refer to the Legrand HPM Connect App Instruction Manual for more detailed instructions and troubleshooting tips.
Add New Comment