User Manual Q&AAnswer
Jan 17, 2025 - 05:46 AM
To update the ACC Facepack on your Hunter 889900, please follow the steps below:
1. Ensure that you have a stable internet connection and access to a computer.
2. Visit the Hunter website (www.hunter.com) and navigate to the "Support" section.
3. Look for the "ACC Facepack" section and click on it.
4. In the ACC Facepack section, you should find the latest software update available for download. Click on the download link to start the process.
5. Once the download is complete, locate the downloaded file on your computer and double-click on it to initiate the installation.
6. Follow the on-screen prompts to complete the installation process. Make sure to carefully read and accept any terms and conditions.
7. After the installation is complete, connect your Hunter 889900 ACC Facepack to your computer using the provided USB cable.
8. Launch the ACC Facepack software on your computer and ensure that it is connected to your device.
9. In the software, navigate to the "Update" or "Firmware Update" section. This may vary depending on the version of the software.
10. Click on the "Check for Updates" or "Update Firmware" button to search for the latest firmware version available for your ACC Facepack.
11. If a new firmware version is found, click on the "Update" or "Install" button to start the update process. Please note that this may take a few minutes.
12. Once the update is complete, disconnect your ACC Facepack from the computer and restart it.
Your Hunter 889900 ACC Facepack should now be successfully updated with the latest software version. If you encounter any issues during the update process, please refer to the instruction manual or contact Hunter customer support for further assistance.
Add New Comment