User Manual Q&AAnswer
Jan 17, 2025 - 05:42 AM
To install the Chesterton Connect EN600491 Gauge, please follow these steps:
1. Install the provided battery: Insert the battery into the gauge according to the instructions provided in the manual.
2. Apply thread sealant: Use thread sealant on the 1/4" NPT threads of the pressure sensor.
3. Install the pressure sensor: xxxx the pressure sensor onto the designated port, ensuring it is securely tightened. Use a wrench to tighten the sensor 2-3 turns past the finger-tight position.
4. Download the Chesterton Connect™ App: Visit the app store on your mobile device and search for "Chesterton Connect™ App." Download and install the app.
5. Follow setup instructions in the mobile app: Open the Chesterton Connect™ App and follow the on-screen instructions to set up the gauge. Make sure to have your device registration details ready.
6. Device Registration: Select the Chesterton Connect Gauge you want to add to the Chesterton Connect Cloud. Enter a name (such as location) for the gauge, choose the desired Chesterton Connect Cloud account, and click "Register."
Please note that you will need a Chesterton Connect™ Gateway for syncing the gauge to the Chesterton Connect™ Cloud. Additionally, a Chesterton Connect™ Cloud account is required prior to setup.
If you encounter any issues during installation or have further questions, you can contact Chesterton support by emailing connect.support@chesterton.com or calling the provided phone numbers.
Remember to follow all safety precautions and warnings mentioned in the manual, such as verifying the product's compatibility with its intended use, proper disposal of the battery, and using appropriate personal protective equipment (PPE) during installation and troubleshooting.
Add New Comment