User Manual Q&AAnswer
Jan 17, 2025 - 04:58 AM
To enroll your fingerprint on the ANVIZ CX3 Fingerprint & Card Time Clock, follow these steps:
1. Ensure that the time clock is powered on and connected to a power source.
2. Locate the fingerprint enrollment button on the time clock. It is usually labeled or indicated by an icon.
3. Press and hold the fingerprint enrollment button for a few seconds until the enrollment mode is activated. The display may show a message indicating that it is ready for fingerprint enrollment.
4. Place your finger on the fingerprint sensor located on the front of the time clock. Ensure that your finger covers the entire sensor area.
5. Keep your finger on the sensor until the time clock successfully captures and recognizes your fingerprint. The display may show a progress indicator or provide feedback on the enrollment process.
6. Once your fingerprint is successfully enrolled, the time clock will store it in its database for future authentication.
Note: It is recommended to enroll multiple fingers to ensure reliable authentication in case of any issues with a specific finger. Refer to the user guide for detailed instructions on fingerprint enrollment and management.
For more detailed instructions and troubleshooting tips, please refer to the ANVIZ CX3 Fingerprint & Card Time Clock User Guide provided with the product.
Add New Comment