User Manual Q&AAnswer
Jan 17, 2025 - 04:51 AM
To connect the KARCHER SP 6 Flat Inox Clear Water Submersible Pump to a hose, follow these steps:
1. Remove the connection nozzle by pressing the Quick-Connect (grey button) located on the pump.
2. xxxx the pump connecting piece onto the connection nozzle.
3. Slide the hose clamp onto the hose.
4. Slide the hose onto the pump connecting piece and secure it by tightening the hose clamp.
5. Slide the connection nozzle back into the Quick-Connect.
Note: The pump connection is equipped with a plug system (Quick-Connect), and hoses with a diameter of 1", 1¼", and 1½" can be connected to the pump connecting piece. Make sure to select a hose with a sufficiently large diameter for optimal pump capacity.
For more detailed instructions and illustrations, please refer to the "Startup" section of the KARCHER SP 6 Flat Inox Clear Water Submersible Pump instructions manual.
Add New Comment