User Manual Q&AAnswer
Jan 17, 2025 - 04:43 AM
To start the Wallas 800 DSL PI Thermo Control Panel for cooking, follow these steps:
1. Press the Power Button for 3 seconds until the yellow power light comes on.
2. Release the button, and the yellow heating light will appear.
3. Wait for approximately 5 minutes until the red combustion light lights up, indicating that the burner flame has been ignited and the combustion has stabilized.
4. The stove will be fully operational about 10 minutes later.
5. The stove is set to always start in Manual Mode ready for cooking.
6. In Manual Mode, turn the Temperature/Power xxxx to the maximum level 6 and begin cooking.
7. Adjust the Temperature/Power xxxx to a lower temperature if needed, similar to adjusting a domestic stove.
8. When Manual Mode for cooking is on, the orange Thermostat light is off.
Please refer to the Wallas 800 DSL PI Thermo Control Panel User Guide for more detailed operation and maintenance instructions. You can find the manual at wallas.com.
Add New Comment