User Manual Q&AAnswer
Jan 17, 2025 - 04:40 AM
According to the safety instructions provided by Paulmann, the replaceability of the light source or operating device depends on the specific symbol mentioned on the product. Please refer to the symbols provided on the website www.paulmann.com/symbols for the energy efficiency class and replaceability information.
If the symbol indicates that the light source or operating device can be replaced by end users without permanent damage to the luminaire (1), you can replace it yourself. Follow these steps:
1. Ensure the luminaire is switched off and unplugged from the power source.
2. Carefully remove any cover or diffuser that may be present on the luminaire.
3. Locate the light source or operating device that needs replacement.
4. Disconnect any connectors or wires attached to the component.
5. Remove the old light source or operating device from its socket or mounting.
6. Insert the new light source or operating device into the socket or mounting, ensuring it is securely in place.
7. Reconnect any connectors or wires to the new component.
8. Put back any covers or diffusers that were removed earlier.
9. Plug the luminaire back into the power source and switch it on to test the replacement.
If the symbol indicates that the light source or operating device can only be replaced by a qualified electrician without permanently damaging the luminaire (2), it is recommended to seek professional assistance. Contact a qualified electrician who can safely replace the component for you.
If the symbol indicates that the light source or operating device is not replaceable and the entire luminaire must be replaced (3), you will need to purchase a new luminaire.
Always prioritize safety and follow the instructions provided in the manual for your specific model.
Add New Comment