User Manual Q&AAnswer
Jan 17, 2025 - 04:38 AM
To connect the SVEN 135 2.0 USB Multimedia Speaker System to your computer, follow these steps:
1. Before connecting, make sure that the speaker system is unplugged.
2. Connect the signal cable (mini-jack 3.5mm) from the built-in speaker to the audio output of your computer.
3. Connect the USB connector to a USB port on your computer or use a 5V DC power supply with the built-in USB cable.
4. Set the volume level to the minimum by turning the VOLUME +/- control wheel on the cable counterclockwise until it stops.
5. Turn on the power supply of your computer and the audio source.
6. Adjust the volume level by turning the VOLUME +/- control wheel.
Note: After finishing using the speaker system, remember to turn off the USB cable from the computer's USB port or the 5V DC power supply.
For more detailed instructions and illustrations, please refer to the SVEN 135 2.0 USB Multimedia Speaker System User Manual provided with your purchase.
Add New Comment