User Manual Q&AAnswer
Jan 17, 2025 - 04:22 AM
To charge the battery pack for the metabo PowerMaxx KP Glue Gun, follow these steps:
1. Before using the glue gun, make sure to charge the battery pack. The ideal storage temperature for the battery pack is between 10°C and 30°C.
2. To remove the battery pack, press the battery pack release button located on the glue gun and remove the battery pack.
3. Connect the battery pack to the charger provided with the glue gun. Make sure the charger is plugged into a power outlet.
4. The charger will indicate the charging status. It may have an LED light that turns red when charging and green when fully charged. Refer to the charger's user manual for specific indications.
5. Allow the battery pack to charge fully. The charging time may vary depending on the battery pack and charger model. Refer to the charger's user manual for the recommended charging time.
6. Once the battery pack is fully charged, disconnect it from the charger.
7. To fit the battery pack back into the glue gun, slide it into the designated slot until it engages securely.
Note: If the performance of the battery pack diminishes, recharge it again. It is important to follow the charging instructions provided in the manual to ensure proper battery pack usage and longevity.
Add New Comment