User Manual Q&AAnswer
Jan 17, 2025 - 04:20 AM
To mount the DOMO DO7346M Mica Heating to the wall, please follow these steps:
1. Drill two holes in the wall that correspond to the attachment points of the wall mount, preferably at about 100 cm above the ground.
2. Insert the supplied plugs into the wall.
3. xxxx the wall mount to the wall using the supplied screws.
4. Measure and mark the two attachment points on the appliance.
5. Drill two holes in the wall at the marked points and insert the plugs.
6. Mount the appliance on the fixing points and xxxx it at the bottom.
7. Make sure there are no objects such as shelves or closets within 1 meter from the top of the appliance.
8. In the bathroom, ensure that the appliance is at least 60 cm away from the bath, washbasin, or shower.
9. The appliance can only be placed horizontally. It will not work if hung vertically against the wall. It has a tip-over safety feature that automatically shuts off the appliance when it falls over or is not placed horizontally.
10. Ensure there is proper ventilation around the appliance and that it is not covered.
11. If the appliance overheats due to obstruction of the grids, it will automatically shut off. Unplug the appliance, wait for it to cool down, and remove the obstruction before switching it back on.
12. The appliance should operate normally after following these instructions. If the problem persists, please contact the nearest customer service.
Please refer to the DOMO DO7346M Mica Heating Instruction Manual for more detailed information and safety precautions.
Add New Comment