User Manual Q&AAnswer
Jan 17, 2025 - 03:36 AM
To install and set up the Canon imageFORMULA DR-M260 DPI Scanner, follow the steps below:
1. Unpack the scanner: Remove all packaging materials and protective tapes from the scanner.
2. Connect the power cord: Plug one end of the power cord into the scanner's power connector and the other end into a power outlet.
3. Connect the USB cable: Connect one end of the USB cable to the USB port on the scanner and the other end to a USB port on your computer.
4. Install the software: Insert the provided CD-ROM into your computer's CD/DVD drive. The installation wizard should automatically start. Follow the on-screen instructions to install the necessary drivers and software.
5. Calibrate the scanner: After the software installation is complete, the scanner calibration process will begin automatically. Follow the on-screen instructions to calibrate the scanner.
6. Configure scanner settings: Open the scanning software on your computer and configure the desired settings, such as resolution, file format, and destination folder. Refer to the user manual for detailed instructions on configuring scanner settings.
7. Test the scanner: Load a document into the scanner's document feeder and initiate a test scan using the scanning software. Verify that the scanned image appears correctly on your computer.
For more detailed instructions and troubleshooting information, please refer to the user manual provided with the scanner.
Add New Comment