User Manual Q&AAnswer
Jan 17, 2025 - 03:19 AM
To install the RAVAK W II/1000 K WC Module Wall Mounted Toilet, please follow the instructions provided in the instruction manual. Here is a step-by-step guide:
1. Before starting the installation, make sure you have all the necessary tools and materials, including a level, drill, screwdriver, measuring tape, and silicone sealant.
2. Begin by locating the desired position for the toilet module on the wall. Ensure that the wall is strong enough to support the weight of the module and the user.
3. Use a level to mark the desired height for the module on the wall. Make sure it is level and straight.
4. Once the height is marked, use a measuring tape to determine the distance between the center of the drain pipe and the marked height on the wall. This measurement will help you position the module correctly.
5. Next, use a drill to create holes in the marked positions on the wall for the mounting brackets. Insert the provided wall plugs into the holes.
6. Attach the mounting brackets to the wall using the screws provided. Make sure they are securely fastened.
7. Place the toilet module onto the mounting brackets, ensuring that it is level and aligned with the marked height on the wall.
8. Connect the water supply to the module using the provided hoses. Ensure that the connections are tight and leak-free.
9. Apply silicone sealant around the edges of the module where it meets the wall to prevent water leakage.
10. Finally, test the toilet for proper functionality by flushing and checking for any leaks. Adjust the water level if necessary.
Please note that this is a general guide, and it is important to refer to the specific instructions provided in the instruction manual for accurate installation steps and any additional requirements or precautions.
Add New Comment