User Manual Q&AAnswer
Jan 17, 2025 - 02:46 AM
To start the AL-KO PRO 170 OHV QSS E-START Gasoline Engine, follow these steps:
1. Before starting the engine, perform a visual check to ensure that all operating and fastening parts are secure and in good condition. Also, check the fuel and oil levels.
2. Fill the fuel tank with clean, fresh, lead-free petrol with a minimum octane rating of 90. Make sure to do this in the open air and away from any open flames or heat sources.
3. Check the oil level and top up with clean oil if necessary. The engine must be level when checking the oil level. Use a funnel to fill the engine oil into the oil filler opening.
4. If the engine has a rechargeable battery, make sure it is fully charged before starting. Connect the rechargeable battery to the charger provided and follow the charging instructions in the manual.
5. Once the engine is prepared, make sure the area around the engine is clear of any flammable objects or debris.
6. To start the engine, follow the starting procedure outlined in the lawnmower's operating instructions. This may involve pulling the starter cable or using an electric starter, depending on the specific model.
7. Observe all safety precautions, such as keeping hands and feet away from rotating parts and avoiding inhaling engine exhaust gases.
8. Once the engine is running, allow it to warm up for a few minutes before using it for any tasks.
Please note that these instructions are a general guide, and it is important to refer to the specific operating instructions for your AL-KO PRO 170 OHV QSS E-START Gasoline Engine for detailed and model-specific instructions.
Add New Comment