Answer
Jan 17, 2025 - 02:39 AM
To install the RADEMACHER Articulated Hand Crank Eyelet for RolloTube Basic, please follow these steps:
1. Begin by installing the tubular motor in the roller shutter box according to the instructions provided with the tubular motor.
2. Once the motor is installed, drill a hole in the wall where you want to insert the articulated crank rod.
3. Push the articulated crank rod through the wall into the emergency motor drive.
4. Secure the articulated plate to the masonry, ensuring it is firmly fixed.
5. In the event of a power failure, attach the hand crank to the articulated crank rod. This will allow you to manually open or close the roller shutter.
6. It is important to note that the hand crank should only be used during a power failure. Do not use it when the motor is running. Also, ensure that the end positions of the roller shutter are not overrun.
7. After using the hand crank, it must be removed from the system immediately to avoid the risk of injury or property damage.
Please refer to the VBD 593-4-1 manual provided by RADEMACHER for more detailed instructions and illustrations.
Add New Comment