User Manual Q&AAnswer
Jan 17, 2025 - 02:25 AM
Inserting and changing gobos in the CHAUVET DJ EZGOBO Battery-Powered LED Gobo Projector is a straightforward process. Here are the step-by-step instructions:
1. Ensure that the projector is turned off and unplugged from the power source.
2. Locate the gobo slot on the front of the projector. It is usually a small opening with a retaining ring around it.
3. Unscrew the retaining ring counterclockwise to loosen it. Be careful not to drop or lose the retaining ring.
4. Once the retaining ring is loose, you can remove it by gently pulling it out of the gobo slot.
5. Take your desired gobo and carefully insert it into the gobo slot, making sure it is properly aligned.
6. Once the gobo is inserted, xxxx the retaining ring back into place by turning it clockwise. Make sure it is securely tightened to hold the gobo in position.
7. Double-check that the gobo is properly seated and aligned within the projector.
8. Plug the projector back into the power source and turn it on to test the gobo projection.
Please refer to the user manual for additional information and illustrations on inserting and changing gobos in the CHAUVET DJ EZGOBO Battery-Powered LED Gobo Projector.
Add New Comment