User Manual Q&AAnswer
Jan 17, 2025 - 02:08 AM
To install the Campingaz Lumogaz Plus gas lamp, follow these steps:
1. Make sure you are in a well-ventilated area, preferably outside, and away from any flame, heat source, or spark.
2. Check that the gas supply is fully turned off by turning the control wheel clockwise as far as it will go.
3. Hold the lamp (caution - it may be hot!) and gently xxxx the Campingaz CV 270 Plus / CV 300 Plus / CV 470 Plus cartridge onto the lamp clockwise until you hear a click (about one sixth of a turn). Do not overtighten the cartridge.
4. If you smell gas, there may be a leak. Immediately put the lamp outside in a well-ventilated area without a heat source and trace and stop the leak. Do not use a flame to trace leaks; use a gas leak solution.
5. Once the cartridge is securely attached, you can proceed to fit the mantle.
Please note that these instructions are a summary, and it is important to read and follow the complete instruction manual provided with the Campingaz Lumogaz Plus gas lamp for detailed and accurate installation steps.
Add New Comment