How do I program the One For All URC7945 Smart Streamer Remote to control my TV, source device, and audio device? (One For All URC7945 Streamer Remote User Manual)

Answer

manuals.plus

Jan 17, 2025 - 01:57 AM

To program the URC7945 remote to control your TV, source device, and audio device, follow these steps:

1. Turn on the TV, source device, and audio device you want to control with the remote.
2. Press and hold the "WATCH TV ACTIVITY" button until the LED at the top of the remote lights up.
3. Press and hold the "SETUP" button until the LED blinks twice.
4. Enter the 4-digit code for your TV using the number keys. You can find the codes in the manual or on the One For All website.
5. Press the "POWER" button to test if the TV turns off. If it does, the code is correct. If not, repeat steps 3 and 4 with a different code.
6. Once the TV is programmed, press the "SOURCE" button to select the source device you want to control (e.g., DVD player, Blu-ray player).
7. Repeat steps 3-5 to program the remote with the correct code for the source device.
8. After programming the source device, press the "AUDIO" button to select the audio device you want to control (e.g., soundbar, AV receiver).
9. Repeat steps 3-5 to program the remote with the correct code for the audio device.
10. Test the remote by pressing the corresponding buttons for each device (e.g., volume buttons for the audio device, channel buttons for the TV).

Note: If you can't find the correct codes for your devices, the URC7945 remote also has a "SEARCH" function that allows you to find the code manually. Refer to the manual for detailed instructions on how to use the "SEARCH" function.

For further assistance, you can also use the Virtual Agent in the app or contact One For All customer support using the provided contact information.