How do I install the Puig KTM 1290 Super Adventure Touring Windscreen? (Puig KTM 1290 Adventure Touring Windscreen Instruction Guide)

Answer

manuals.plus

Jan 17, 2025 - 01:50 AM

To install the Puig KTM 1290 Super Adventure Touring Windscreen, please follow the instructions provided in the manual. Here is a step-by-step guide:

1. Start by gathering all the necessary components listed in the overview section of the manual. Make sure you have the touring screen, screws, silentblocks, bushings, and screws caps.

2. Begin by removing the existing windscreen from your KTM 1290 Super Adventure.

3. Take the touring screen and align it with the mounting holes on your motorcycle's fairing.

4. Insert the M5x8 special screws (length 25) through the holes on the touring screen and into the fairing. Use the M5 ISO7380 xxxx caps to secure the screws in place. Repeat this step for all the mounting holes.

5. Next, attach the Ø12xØ6x9 silentblocks to the bushings. These silentblocks will help reduce vibrations and provide stability to the windscreen. Insert the silentblocks into the corresponding holes on the touring screen.

6. Take the Ø12xØ6,8x7,3 bushings with flange and insert them into the remaining holes on the touring screen.

7. Secure the bushings in place by using the M5x8 special screws (length 14) and the M5 ISO7380 xxxx caps. Repeat this step for all the bushings.

8. Finally, check that all the screws and components are securely fastened. Make sure the windscreen is properly aligned and adjusted to your desired position.

Please note that these instructions are a general guide, and it's always recommended to refer to the specific instructions provided in the manual for your Puig KTM 1290 Super Adventure Touring Windscreen. If you have any further questions or concerns, you can contact Puig directly through their website or email provided in the manual.