How do I install and set up the StarTech com USB to Bluetooth Version 5.0 Adapter? (StarTech.com USB Bluetooth 5.0 Adapter User Guide)

Answer

manuals.plus

Jan 17, 2025 - 01:42 AM

To install and set up the StarTech com USB to Bluetooth Version 5.0 Adapter, please follow these steps:

1. Ensure that your host computer has an available USB Type-A port.

2. Insert the USB Bluetooth Adapter into the USB Type-A port on your computer.

3. Wait for your computer to recognize the adapter and install the necessary drivers. This process may take a few moments.

4. Once the drivers are installed, you can start using the Bluetooth functionality of the adapter.

5. To connect a Bluetooth device, make sure the device is in pairing mode. Refer to the user manual of your specific Bluetooth device for instructions on how to enable pairing mode.

6. On your computer, locate the Bluetooth icon in the system tray (usually located in the bottom right corner of the screen). Right-click on the Bluetooth icon and select "Add a Bluetooth Device" or a similar option.

7. The computer will scan for available Bluetooth devices. Select the device you want to connect to and click "Pair" or "Connect".

8. Follow any additional on-screen prompts to complete the pairing process.

9. Once the device is successfully paired, you can use it with your computer via Bluetooth.

Please note that the above steps are general guidelines, and the exact process may vary depending on your operating system and Bluetooth device. For more detailed instructions and troubleshooting tips, refer to the Quick-Start Guide provided with the USB to Bluetooth Adapter or visit the StarTech.com website at www.startech.com/USBA-BLUETOOTH-V5-C2 for the latest manuals and product information.