User Manual Q&AAnswer
Jan 17, 2025 - 01:05 AM
To set the clock and program the auto-brewing feature on the Kenmore 100.4070431 12-cup Coffee Maker, follow these steps:
1. Plug in the coffee maker and make sure it is turned off.
2. Press the Hour button to set the desired hour. The clock will flash the default time of 12:00 AM. Keep pressing the Hour button until you reach the desired hour (between 12:00 am to 11:00 pm).
3. Press the Min button to set the desired minute. Keep pressing the Min button until you reach the desired minute (between 1 and 59).
4. The clock will begin keeping time once you release the Hour and Min buttons.
To program the auto-brewing feature:
1. Make sure the clock is set to the correct time.
2. Press the Prog button on the control panel. The indicator will illuminate.
3. Set the time you want the coffee maker to start brewing by pressing the Hour and Min buttons. Make sure to set the correct designation of AM or PM.
4. Once you have set the desired brewing time and the clock has returned to the time of day, press the Auto On button.
5. The coffee maker will automatically start brewing at the programmed time.
6. To cancel the auto-brewing, press the Auto On button a second time. The Auto On light will go out.
7. To check the programmed brewing time, push in the Set Auto button, and the time will be displayed.
Please refer to the user manual for more detailed instructions and illustrations.
Add New Comment