User Manual Q&AAnswer
Jan 17, 2025 - 01:05 AM
To set up the Single Nozzle SPYDSS-9G Drop-In Sprayer on your Spyker Spreader, follow these steps:
1. Remove all contents from inside the tank and the box. Report any missing or damaged items to your dealer immediately.
2. Attach the spring mounting clips to the spreader hopper near the vertical centerline using the supplied screws.
3. Attach the spray hose wingnut to the ball valve on top of the tank.
4. Snap the hose into the spring mounting clips with the nozzle facing forward. Secure the hose against the spreader frame using a cable tie.
5. Align the thumb switch with the handle and attach it with a xxxx clamp.
6. Install the pump wiring assembly clips to the thumb switch spades.
7. Connect the battery wiring assembly.
8. Connect the swivel elbow fitting to the pump inlet port.
9. Install the pressure gauge.
10. Assembly is complete.
For more detailed instructions and illustrations, please refer to the Single Nozzle SPYDSS-9G Drop-In Sprayer User Manual provided with your product.
Add New Comment