User Manual Q&AAnswer
Jan 17, 2025 - 01:01 AM
To light the XO Fire Centerpiece, follow these steps:
1. Turn the ON/OFF valve located on the side of the fire table completely to the ON position.
2. Make sure the fuel supply (LP or NG) is properly connected and turned on at the source (LP tank or NG Valve).
3. When you hear gas flowing, use either a long-stem wooden match or a butane fireplace lighter to place a flame near the burner.
4. If the burner does not light, does not stay lit, or the flame is very low, shut off the gas supply and wait five minutes to allow all fumes to clear. Start again from step 1, making sure all gas valves are completely opened.
Please refer to the user manual for additional safety precautions and instructions.
Add New Comment