User Manual Q&AAnswer
Jan 17, 2025 - 12:27 AM
To connect your laptop to the Tanggula Y1 projector, please follow these steps:
1. Make sure your laptop and the projector are powered off.
2. Locate the HDMI cable included in the box.
3. Connect one end of the HDMI cable to the HDMI port on your laptop.
4. Connect the other end of the HDMI cable to the HDMI input port on the Tanggula Y1 projector.
5. Power on both your laptop and the projector.
6. On the projector, press the "Source" or "Input" button on the remote control or the projector itself to select the HDMI input source.
7. Your laptop's screen should now be mirrored or extended onto the projector's display. Adjust the projection size and focus as needed.
Note: If your laptop does not have an HDMI port, you can use a VGA or AV cable to connect it to the projector. Simply connect one end of the cable to your laptop's VGA or AV output port and the other end to the corresponding input port on the projector. Follow the same steps mentioned above to select the appropriate input source on the projector.
For more detailed instructions and troubleshooting tips, please refer to the user manual provided with the Tanggula Y1 projector.
Add New Comment