User Manual Q&AAnswer
Jan 17, 2025 - 12:25 AM
To install the sygonix 2525291 Wi-Fi Door Intercom with Door Viewer, follow these steps:
1. Prepare your front door: If you have an existing peephole, remove it. If there is no peephole, drill a hole with a diameter of 16 mm at eye level.
2. Install the door viewer/camera: Pull off the protective strips on the adhesive strips of the camera. Thread the connecting cable through the hole in your door from the outside. Push the camera into the hole from the outside, making sure the call button is pointing downwards. Secure the camera by attaching the indoor bracket to the back of the camera using the screws provided.
3. Connect the camera cable to the display/indoor unit: Thread the camera cable through the recessed square of the bracket and push it into the slot in the middle of the bracket. Connect the camera cable to the back of the display, ensuring the plug is correctly aligned.
4. Hang the display on the bracket: Make sure the camera cable is not pinched. The installation is now complete.
For more detailed instructions and illustrations, please refer to the "Installation" section in the sygonix 2525291 Wi-Fi Door Intercom with Door Viewer Instruction Manual.
Add New Comment