User Manual Q&AAnswer
Jan 17, 2025 - 12:21 AM
To assemble the Goldair GCTF160 Tower Fan, follow these steps:
1. Loosen the base locking nut located at the bottom of the fan by turning it anticlockwise. Push it down along the power cord to get it out of the way.
2. Run the power cord through the central gap between the two halves of the base.
3. Connect the two halves of the base by pushing the plastic pegs on each half into the corresponding slots on the other half.
4. Move the base locking nut back into position and fully tighten it in a clockwise direction.
5. Pass the power cord through the guides on the base so that it comes out the rear of the base.
Once assembled, place the fan on a dry, level, and sturdy surface. Ensure all packaging has been removed before use.
Note: For visual reference, please refer to the user manual provided with the Goldair GCTF160 Tower Fan.
Add New Comment