User Manual Q&AAnswer
Jan 17, 2025 - 12:06 AM
To connect the MORLEY Line Level Shifter to your audio setup, please follow these steps:
1. Identify the input and output connections on the Line Level Shifter. The input is labeled "INPUT" and the output is labeled "OUTPUT."
2. Determine the type of audio signal you are working with. The Line Level Shifter supports both balanced and unbalanced signals.
3. If you are using a balanced signal, use a balanced cable (typically XLR) to connect the audio source's output to the "INPUT" of the Line Level Shifter. If you are using an unbalanced signal, use an unbalanced cable (such as a 1/4" TS or RCA) to make the connection.
4. Connect the Line Level Shifter's "OUTPUT" to the input of your audio device (e.g., mixer, amplifier, recording interface) using the appropriate cable for your setup.
5. Ensure that all connections are secure and properly seated.
6. Power on the Line Level Shifter by plugging it into a power outlet. The unit requires a standard AC power source.
7. Adjust the input and output level controls on the Line Level Shifter to achieve the desired signal levels. The input level control adjusts the incoming signal, while the output level control adjusts the signal going to your audio device.
8. Test the audio signal by playing audio through your setup. If necessary, fine-tune the input and output level controls to optimize the signal quality.
Please refer to the MORLEY Line Level Shifter Instruction Manual for more detailed information, including troubleshooting tips and additional usage scenarios.
Add New Comment