User Manual Q&AAnswer
Jan 16, 2025 - 11:58 PM
To connect your NETGEAR EX2700 N300 WiFi Range Extender to your existing WiFi network, you have two options: installation with WPS (Wi-Fi Protected Setup) or installation without WPS.
1. Installation with WPS:
- Make sure your router supports WPS. Look for the WPS symbol on your router.
- Press the WPS button on the side panel of the WiFi adapter. The WPS LED will start blinking.
- Within two minutes, press the WPS button on your router or access point.
- When the WiFi adapter connects to your existing WiFi network, the WPS LED on the WiFi adapter will light solid green and the Router Link LED will also light up.
- If the Router Link LED does not light up, try the installation without WPS method.
2. Installation without WPS:
- On your computer, access the list of available WiFi connections and connect to "NETGEAR_EXT". Once connected, the Device Link LED on the WiFi adapter will light up.
- Launch a web browser and go to http://www.mywifiext.net.
- Click the "New Extender Setup" button to start the setup process.
- Follow the on-screen instructions to set up your login credentials, select your WiFi network, enter the WiFi password, and choose a name for your WiFi Adapter network.
- Verify the settings and click "Continue" to complete the setup.
- You will receive a confirmation that the WiFi adapter has been successfully configured.
- Unplug the WiFi adapter and plug it into an electrical outlet close to your Office Suite phone.
- Connect the Office Suite phone to the WiFi adapter using an Ethernet cable.
For more detailed instructions and troubleshooting, please refer to the NETGEAR EX2700 N300 WiFi Range Extender User Guide.
Add New Comment