User Manual Q&AAnswer
Jan 16, 2025 - 11:54 PM
Sure! Here is a step-by-step guide on how to install the phocos ECO-N-T Series Solar Charge Controller:
1. Before starting the installation, make sure to read and understand all the safety instructions provided in the user manual.
2. Determine the system voltage of your solar power system. The phocos ECO-N-T Series controller is designed for 12V and 24V systems.
3. Identify the type of battery you are using. The controller is suitable for lead-acid batteries, including vented, GEL, or AGM batteries.
4. It is highly recommended to install an inline fuse as close to the battery terminal as possible. Use a 15A fuse for 10A charging or a 30A fuse for 20A charging.
5. Connect the battery to the charge controller. Connect the positive (+) terminal of the battery to the positive (+) terminal of the charge controller, and the negative (-) terminal of the battery to the negative (-) terminal of the charge controller.
6. Connect the PV modules (solar panels) to the charge controller. Connect the positive (+) terminal of the PV modules to the positive (+) terminal of the charge controller, and the negative (-) terminal of the PV modules to the negative (-) terminal of the charge controller.
7. Connect the load (electrical devices) to the charge controller. Connect the positive (+) terminal of the load to the positive (+) terminal of the charge controller, and the negative (-) terminal of the load to the negative (-) terminal of the charge controller.
8. Ensure all connections are secure and properly tightened.
9. Once the installation is complete, you can power on the system and monitor the charge controller's operation.
Remember to always follow the safety instructions and guidelines provided in the user manual to ensure a safe and proper installation of the phocos ECO-N-T Series Solar Charge Controller.
Add New Comment