User Manual Q&AAnswer
Jan 16, 2025 - 11:49 PM
To assemble the Lasko T42905 42 Inch Wind Curve with Bluetooth Control, follow these steps:
1. Lay the fan down so that the front grill and control panel are facing up.
2. Assemble the support base halves by interlocking the bosses on Support Base A into the boss holes on Support Base B.
3. Thread the power supply cord through the large hole in the center of the Support Base Assembly.
4. Secure two #8 X 3/8" screws into the two outer holes in the bottom of the base.
5. Align the Support Base Assembly with the Motor Base, making sure the cord channel on the bottom of the support base assembly is towards the back of the fan.
6. Attach the Support Base Assembly to the Motor Base with four 1/2" long M5 screws. Make sure to align the key on the Support Base Assembly with the locating notch on the Motor Base.
7. Gently pull any excess slack of the power supply cord and place it in the wire locating trough.
For a visual reference, please refer to the instruction manual provided with the product.
Add New Comment