User Manual Q&AAnswer
Jan 16, 2025 - 11:25 PM
To connect the DALI WSR wireless subwoofer receiver to your subwoofer, follow these steps:
1. Ensure that the subwoofer is switched off or disconnected from mains power.
2. Use the supplied RCA Phono cable to connect the output socket of the WSR to the LFE input socket of the subwoofer. The output socket of the WSR is highlighted in Diagram 2 of the user manual.
3. Connect the WSR power supply to a mains socket and then connect the power supply to the WSR using the USB power cable supplied.
4. Switch on the subwoofer or reconnect it to mains power. If the subwoofer has a volume control, set it to around 25% of full volume.
Note: If the subwoofer does not have a dedicated LFE input, connect the output of the WSR to the subwoofer's standard line input and either switch its low-pass filter to bypass or set its low-pass filter frequency to the maximum.
For more detailed instructions and illustrations, please refer to the "Installation and Setup" section of the DALI WSR Wireless Subwoofer Receiver User Manual.
Add New Comment