User Manual Q&AAnswer
Jan 16, 2025 - 11:15 PM
To replace the air filter in the breeze33 BZ33-HP24WALL2-G2-C Mini Split Comfort Series Heat Pump, follow these steps:
1. Turn off the power to the unit by switching off the circuit breaker or disconnecting the power supply.
2. Locate the air filter cover on the indoor unit. It is usually located on the front panel or on the side of the unit.
3. Remove the air filter cover by gently pulling it towards you or sliding it out of its slot.
4. Take out the old air filter from the filter compartment. If the filter is dirty, it is recommended to wear gloves or use a mask to avoid inhaling dust particles.
5. Dispose of the old filter properly.
6. Insert the new air filter into the filter compartment. Make sure it is properly aligned and fits securely.
7. Reattach the air filter cover by sliding it back into place or pushing it firmly until it clicks into position.
8. Turn on the power to the unit and test the operation.
Note: It is recommended to clean or replace the air filter every 3 to 6 months, depending on usage and air quality. Regular maintenance of the air filter helps ensure optimal performance and efficiency of the heat pump.
For more detailed instructions or if you encounter any difficulties, please refer to the user guide provided with the product or visit the manufacturer's website at breeze33.com for additional support and information.
Add New Comment