User Manual Q&AAnswer
Jan 16, 2025 - 11:05 PM
To properly inflate and fit the Leaflet Circus Swimming Armbands, follow these steps:
1. Inflate each section by mouth while squeezing the valve lightly at its base. It is important to follow the numerical sequence indicated on the armbands. Failure to do so may result in improperly inflated armbands.
2. Insert the stopper into the valve and recess the valve by pushing down firmly on it. Never overinflate or use high-pressure air to inflate the armbands.
3. The swimming aids should be worn on both upper arms with the flat sides facing towards the body. Position the armbands securely between the inside of the elbow and the armpit.
4. To inflate the armbands, gently squeeze the valves, insert them into your mouth, and blow. Do not use compressed air under any circumstances and avoid overinflating.
5. To seal the armbands, insert the stoppers and push the valves in.
6. To deflate the armbands, squeeze the shaft of the non-return valve between two fingers.
7. Rinse the armbands with water and air dry them thoroughly before storing them in a safe storage area.
Please note that the Leaflet Circus Swimming Armbands will not protect against drowning. Always use them under constant supervision and ensure all air chambers are fully inflated.
Add New Comment