User Manual Q&AAnswer
Jan 16, 2025 - 10:45 PM
To install the Arlux LIGHTING EMMY Indoor Wall Lamp, please follow these steps:
1. Ensure that the installation is carried out by a qualified electrician or a person knowledgeable in electrical installations, in accordance with the standards and regulations of your country.
2. Before starting the installation or any maintenance, make sure to turn off the electrical network to avoid any potential risks.
3. Identify the electrical wires in your wall. The Arlux LIGHTING EMMY Indoor Wall Lamp requires a blue wire for the neutral connection and a green/yellow wire for the earth connection.
4. Connect the blue wire from the wall to the neutral terminal of the lamp. Connect the green/yellow wire from the wall to the earth terminal of the lamp.
5. Ensure that the power supply is not connected during the installation process.
6. Once the electrical connections are made, securely fix the lamp to the wall using the appropriate tools and hardware.
7. After the installation is complete, you can turn on the power supply and test the lamp.
Please note that this lamp is designed for indoor use only and is not compatible with a dimmer. The light source of the lamp can only be replaced by a professional, and the power supply should also be replaced by a professional if needed.
For any further questions or concerns, it is recommended to consult the Arlux LIGHTING EMMY Indoor Wall Lamp Instruction Manual or contact your local authorities or stockist for advice on recycling and proper disposal of electrical products.
Add New Comment