User Manual Q&AAnswer
Jan 16, 2025 - 10:35 PM
To install the Rizoma PT415 Fox License Plate Support Kit, please follow the instructions provided in the user manual. Here is a step-by-step guide:
1. Before you start, ensure that your motorbike is standing firmly and the temperature of the exhausts and the engine is similar to the ambient temperature.
2. Check the completeness of the kit by referring to the part list in the manual.
3. Begin by installing the plate for medium size license plates.
4. Install the pin of positioning according to the instructions provided.
5. Install the indicators as per the manual's instructions.
6. Insert the wirings and route them under the seat, following the provided guidelines.
7. Adjust the reflector for the large license plate, if applicable.
8. Make the necessary electric connections according to the instructions.
Please note that these instructions are a general overview and it is important to refer to the specific details and diagrams provided in the user manual for accurate installation. Additionally, Rizoma recommends having the installation performed by skilled personnel for your safety.
For any doubts or further assistance, it is recommended to contact your authorized Rizoma dealer or visit their website at www.rizoma.com.
Add New Comment